| | |
 | 8in Flat Bastard - handled - 6 pack
(Part number: 3-342-08-1-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 200mm
Length = 8 inch
Section = 19x5mm
Teeth per inch = 9
Type of cut = 1
Weight = 184gm| Mfr. Rec. Price Each: | £7.77 Inc.VAT (£6.61 Ex. VAT) | | Buy Online Now For: | £6.99 Inc.VAT (£5.95 Ex. VAT) | | Diygear's Discount Saves You: £0.78Inc.VAT |
|
|
|
| | 8in Flat Second - handled - 6 pack
(Part number: 3-342-08-2-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 200mm
Length = 8 inch
Section = 19x5mm
Teeth per inch = 12
Type of cut = 2
Weight = 193gm| Mfr. Rec. Price Each: | £8.23 Inc.VAT (£7.00 Ex. VAT) | | Buy Online Now For: | £7.40 Inc.VAT (£6.30 Ex. VAT) | | Diygear's Discount Saves You: £0.82Inc.VAT |
|
|
|
| | 10in Flat Bastard - handled - 6 pack
(Part number: 3-342-10-1-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 250mm
Length = 10 inch
Section = 23x5,5mm
Teeth per inch = 9
Type of cut = 1
Weight = 274gm| Mfr. Rec. Price Each: | £8.93 Inc.VAT (£7.60 Ex. VAT) | | Buy Online Now For: | £8.04 Inc.VAT (£6.84 Ex. VAT) | | Diygear's Discount Saves You: £0.89Inc.VAT |
|
|
|
| | 10in Flat Second - handled - 6 pack
(Part number: 3-342-10-2-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 250mm
Length = 10 inch
Section = 23x5,5mm
Teeth per inch = 12
Type of cut = 2
Weight = 274gm| Mfr. Rec. Price Each: | £9.35 Inc.VAT (£7.96 Ex. VAT) | | Buy Online Now For: | £8.42 Inc.VAT (£7.16 Ex. VAT) | | Diygear's Discount Saves You: £0.94Inc.VAT |
|
|
|
| | 10in Flat Smooth - handled - 6 pack
(Part number: 3-342-10-3-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 250mm
Length = 10 inch
Section = 23x5,5mm
Teeth per inch = 21
Type of cut = 3
Weight = 274gm| Mfr. Rec. Price Each: | £10.20 Inc.VAT (£8.68 Ex. VAT) | | Buy Online Now For: | £9.18 Inc.VAT (£7.81 Ex. VAT) | | Diygear's Discount Saves You: £1.02Inc.VAT |
|
|
|
| | 12in Flat Bastard - handled - 6 pack
(Part number: 3-342-12-1-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 300mm
Length = 12 inch
Section = 28x7mm
Teeth per inch = 9
Type of cut = 1
Weight = 417gm| Mfr. Rec. Price Each: | £10.74 Inc.VAT (£9.14 Ex. VAT) | | Buy Online Now For: | £9.67 Inc.VAT (£8.23 Ex. VAT) | | Diygear's Discount Saves You: £1.07Inc.VAT |
|
|
|
| | 12in Flat Second - handled - 6 pack
(Part number: 3-342-12-2-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 300mm
Length = 12 inch
Section = 28x7mm
Teeth per inch = 12
Type of cut = 2
Weight = 446gm| Mfr. Rec. Price Each: | £11.14 Inc.VAT (£9.48 Ex. VAT) | | Buy Online Now For: | £10.03 Inc.VAT (£8.53 Ex. VAT) | | Diygear's Discount Saves You: £1.11Inc.VAT |
|
|
|
| | 12in Flat Smooth - handled - 6 pack
(Part number: 3-342-12-3-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 300mm
Length = 12 inch
Section = 28x7mm
Teeth per inch = 21
Type of cut = 3
Weight = 452gm| Mfr. Rec. Price Each: | £12.04 Inc.VAT (£10.25 Ex. VAT) | | Buy Online Now For: | £10.84 Inc.VAT (£9.23 Ex. VAT) | | Diygear's Discount Saves You: £1.20Inc.VAT |
|
|
|
| | 14in Flat Bastard - handled - 6 pack
(Part number: 3-342-14-1-3)
Use: Suitable for fast material removal where finish is not so important. The large teeth resist clogging, and are suitable for Use: on the softest aluminium to the hardest steel.
Often Used in steel making and in general foundry work.
Shape: Flat. Edges and surfaces parallel. Surfaces are milled with straight teeth with intermittent chipbreakers. Edges uncut.
Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth.
Length = 350mm
Length = 14 inch
Section = 33x7mm
Teeth per inch = 9
Type of cut = 1
Weight = 606gm| Mfr. Rec. Price Each: | £13.62 Inc.VAT (£11.59 Ex. VAT) | | Buy Online Now For: | £12.26 Inc.VAT (£10.43 Ex. VAT) | | Diygear's Discount Saves You: £1.36Inc.VAT |
|
|